我想解锁我的iPhone 4 GSM卡
GEVEY™ Ultra Instructions for GSM iPhone 4
These instructions cover:
-
How to unlock any GSM iPhone 4 without Jailbreak
-
Experts Only: How to install FuriousMod to Set Up GEVEY Ultra for a Jailbroken AT&T or GSM iPhone 4
Your GEVEY Ultra can unlock your GSM iPhone 4 to work on any GSM network in the world.
Only follow these instructions if you are using a GSM iPhone 4. Make sure your iPhone modem firmware complies with the supported versions listed in the GEVEY Ultra product description.
Remember also that your GSM iPhone 4 must be activated through iTunes in order for the GEVEY reset SIM card to enter setup mode.
How to unlock any GSM iPhone 4 without Jailbreak
AInsert Gevey Ultra and Sim Card
First, turn off your iPhone 4. Insert the chosen carrier SIM card that you want use after you unlock your iPhone with your Gevey Ultra in the custom SIM tray.
If you have an earlier version of the GEVEY Ultra, you may have to cut your SIM card to fit your iPhone SIM tray.
CSelect Settings
Select the Settings iPhone application.
ESelect SIM Applications
In the Phone menu, select SIM Applications.
GAccept Settings
The following GEVEY menu screen will appear, select Accept, and then press your iPhone’s home button and wait 15 seconds.
IAirplane Mode SIM Activation
In the Settings menu, and turn on Airplane Mode. After 40 Seconds, you will see the message No SIM Card Installed.
Click Ok and then turn off Airplane Mode in the Settings menu. You will see the message No SIM Card installed, but you can ignore this message.
Click Ok and then wait for a signal. Your iPhone 4 is now unlocked.
BSelect Settings
Turn on your iPhone 4, slide to unlock, and wait for the GEVEY screen to appear as shown. Select Cancel.
If the screen shown here does not appear within 15 seconds, move on to step C.
DSelect Phone
In the Settings application menu, select Phone.
FSelect Instructions
In the SIM Applications meunu, select Instructions.
HDial 112
Open your Phone application and select Keypad. Wait for one signal bar to appear in the upper left corner, then Dial 112. End the call immediately.
Note that this call will not connect to an emergency service. Press your iPhone’s home button.
If these steps fail to unlock your GSM iPhone 4, you might have taken too much time to complete some of the step that require immediate action. Reboot your iPhone 4 and repeat these steps 3 to 4 times.
If all methods fail to unlock your GSM iPhone 4, either your chosen carrier SIM card is too old, you damaged your chosen carrier SIM card when cutting, your files on your GSM iPhone 4 have been corrupted, or you have received a defected GEVEY turbo SIM. Before calling for support, you should request a new micro SIM from your preferred carrier. A new micro SIM solves over half of all GEVEY unlock problems.
If you would like to keep your current Apple iOS and your GSM iPhone 4 is not Jailbroken, first backup your iPhone data with iTunes, and then perform a factory reset from your iPhone [Settings → General → Reset → Erase All Content and Settings]. Do not restore your data to avoid re-installing a corrupted file to your iPhone.
After performing a factory reset, please repeat the unlocking process. Once you have successfully unlocked your GSM iPhone 4, you can restore your previous backup through iTunes.
If you would like to update your Apple iOS to the latest version, or if your GSM iPhone 4 is jailbroken, you will need to wait for a custom upgrade to be released for the iOS version you want to upgrade to. Based on past history, the custom upgrade should be available within a couple weeks after the latest iOS update is released by Apple. Follow Apple N Berry on Facebook and Twitter for the latest updates.
If you are still unable to unlock your GSM iPhone 4 after performing all troubleshooting steps above, just call us for technical support toll free at 1 (800) 859-7816 or call (510) 578-5269. Please have your
-
Order number
-
White GEVEY reset SIM
-
SIM ejector tool
.
Note that if you can't confirm your order number and e-mail address with us, we won't be able to offer support.
We may ask that you send the GEVEY turbo SIM back to us for testing. If we find the GEVEY turbo SIM is defective, we will offer you a choice between replacement or refund. If we find that the GEVEY turbo SIM you received works properly, we will notify you that your GSM iPhone 4 has a software issue.
Experts Only: How to install FuriousMod to Set Up GEVEY Ultra for a Jailbroken GSM iPhone 4
The following instructions are for expert users only who want to unlock a jailbroken GSM iPhone 4.
Apple N Berry cannot provide support for the jailbreak process. We make this method available to those who have already jailbroken their GSM iPhone 4 and would like to use the GEVEY Ultra unlock solution..
Remember also that your GSM iPhone 4 must be activated through iTunes and jailbroken with the latest version of Redsn0w.
AOpen Cydia
After you have completed the jailbreak process for your GSM iPhone 4, open Cydia from your applications screen.
CManage Cydia
Select Manage from the bottom menu panel of the Cydia home screen.
EEdit Sources
From the Sources menu, select Edit at the top of your screen.
GReturn to Cydia
Select Return to Cydia.
ISelect FuriousMod Version
Select the appropiate FuriousMod version for your iOS.
For iOS 4.x and below, select FuriousMod iOS 4.x.. For iOS 5.x, select FuriousMod.
KConfirm Installation
Confirm your installation by selecting Confirm in the upper right corner of the confirmation screen.
MPower Off
Now continuously hold the power button for about 3 seconds, and then slide to power off your iPhone.
BSelect Settings
The screen shown here may appear. If you see this screen, select User. If not, proceed to Step C
DSelect Sources
From the Manage menu, select Sources.
FEnter FuriousMod URL
Select Add on upper left corner of the Sources screen. The Enter Cydia/APT URL screen will appear. Type the following URL http://cydia.furiousmod.com and then select Add Source.
HDial 112
Open your Phone application and select Keypad. Wait for one signal bar to appear in the upper left corner, then Dial 112. End the call immediately.
From the Sources menu, select FuriousMod.com.
JDial 112
From the FuriousMod details page, select Install at the upper right corner.
LRestart SpringBoard
After the installation is complete, select Restart SpringBoard.
NCheck Carrier
These instructions cover:
- How to unlock any GSM iPhone 4 without Jailbreak
- Experts Only: How to install FuriousMod to Set Up GEVEY Ultra for a Jailbroken AT&T or GSM iPhone 4
Your GEVEY Ultra can unlock your GSM iPhone 4 to work on any GSM network in the world.
Only follow these instructions if you are using a GSM iPhone 4. Make sure your iPhone modem firmware complies with the supported versions listed in the GEVEY Ultra product description.
Remember also that your GSM iPhone 4 must be activated through iTunes in order for the GEVEY reset SIM card to enter setup mode.
How to unlock any GSM iPhone 4 without Jailbreak
First, turn off your iPhone 4. Insert the chosen carrier SIM card that you want use after you unlock your iPhone with your Gevey Ultra in the custom SIM tray.
If you have an earlier version of the GEVEY Ultra, you may have to cut your SIM card to fit your iPhone SIM tray.
Select the Settings iPhone application.
In the Phone menu, select SIM Applications.
The following GEVEY menu screen will appear, select Accept, and then press your iPhone’s home button and wait 15 seconds.
In the Settings menu, and turn on Airplane Mode. After 40 Seconds, you will see the message No SIM Card Installed.
Click Ok and then turn off Airplane Mode in the Settings menu. You will see the message No SIM Card installed, but you can ignore this message.
Click Ok and then wait for a signal. Your iPhone 4 is now unlocked.
Turn on your iPhone 4, slide to unlock, and wait for the GEVEY screen to appear as shown. Select Cancel.
If the screen shown here does not appear within 15 seconds, move on to step C.
In the Settings application menu, select Phone.
In the SIM Applications meunu, select Instructions.
Open your Phone application and select Keypad. Wait for one signal bar to appear in the upper left corner, then Dial 112. End the call immediately.
Note that this call will not connect to an emergency service. Press your iPhone’s home button.
If these steps fail to unlock your GSM iPhone 4, you might have taken too much time to complete some of the step that require immediate action. Reboot your iPhone 4 and repeat these steps 3 to 4 times.
If all methods fail to unlock your GSM iPhone 4, either your chosen carrier SIM card is too old, you damaged your chosen carrier SIM card when cutting, your files on your GSM iPhone 4 have been corrupted, or you have received a defected GEVEY turbo SIM. Before calling for support, you should request a new micro SIM from your preferred carrier. A new micro SIM solves over half of all GEVEY unlock problems.
If you would like to keep your current Apple iOS and your GSM iPhone 4 is not Jailbroken, first backup your iPhone data with iTunes, and then perform a factory reset from your iPhone [Settings → General → Reset → Erase All Content and Settings]. Do not restore your data to avoid re-installing a corrupted file to your iPhone.
After performing a factory reset, please repeat the unlocking process. Once you have successfully unlocked your GSM iPhone 4, you can restore your previous backup through iTunes.
If you would like to update your Apple iOS to the latest version, or if your GSM iPhone 4 is jailbroken, you will need to wait for a custom upgrade to be released for the iOS version you want to upgrade to. Based on past history, the custom upgrade should be available within a couple weeks after the latest iOS update is released by Apple. Follow Apple N Berry on Facebook and Twitter for the latest updates.
If you are still unable to unlock your GSM iPhone 4 after performing all troubleshooting steps above, just call us for technical support toll free at 1 (800) 859-7816 or call (510) 578-5269. Please have your
- Order number
- White GEVEY reset SIM
- SIM ejector tool .
Note that if you can't confirm your order number and e-mail address with us, we won't be able to offer support.
We may ask that you send the GEVEY turbo SIM back to us for testing. If we find the GEVEY turbo SIM is defective, we will offer you a choice between replacement or refund. If we find that the GEVEY turbo SIM you received works properly, we will notify you that your GSM iPhone 4 has a software issue.
Experts Only: How to install FuriousMod to Set Up GEVEY Ultra for a Jailbroken GSM iPhone 4
The following instructions are for expert users only who want to unlock a jailbroken GSM iPhone 4.
Apple N Berry cannot provide support for the jailbreak process. We make this method available to those who have already jailbroken their GSM iPhone 4 and would like to use the GEVEY Ultra unlock solution..
Remember also that your GSM iPhone 4 must be activated through iTunes and jailbroken with the latest version of Redsn0w.
After you have completed the jailbreak process for your GSM iPhone 4, open Cydia from your applications screen.
Select Manage from the bottom menu panel of the Cydia home screen.
From the Sources menu, select Edit at the top of your screen.
Select Return to Cydia.
Select the appropiate FuriousMod version for your iOS.
For iOS 4.x and below, select FuriousMod iOS 4.x.. For iOS 5.x, select FuriousMod.
Confirm your installation by selecting Confirm in the upper right corner of the confirmation screen.
Now continuously hold the power button for about 3 seconds, and then slide to power off your iPhone.
The screen shown here may appear. If you see this screen, select User. If not, proceed to Step C
From the Manage menu, select Sources.
Select Add on upper left corner of the Sources screen. The Enter Cydia/APT URL screen will appear. Type the following URL http://cydia.furiousmod.com and then select Add Source.
Open your Phone application and select Keypad. Wait for one signal bar to appear in the upper left corner, then Dial 112. End the call immediately.
From the Sources menu, select FuriousMod.com.
From the FuriousMod details page, select Install at the upper right corner.
After the installation is complete, select Restart SpringBoard.